Architectural Tempered U Glass

In modern architecture, glass is an indispensable material. Many people think that glass is flat and is mostly used in doors, windows, and curtain walls. However, with the development of the construction industry, more and more new materials have emerged and are widely used. For example: architectural tempered U glass, appearance enables buildings to achieve complex curves and gives designers more room to play.
U-shaped glass (or grooved glass) is produced continuously by rolling and forming. Because its cross section is "U" shaped, it is called U-shaped glass. It is a novel architectural profile glass with nearly 40 years of production and application history abroad, and is adopted by urban and rural buildings in many countries worldwide.

U-shaped glass is so widely used as a glass material in the construction industry, and it naturally has advantages that other glasses do not have. Because of its U-shaped cross-section, it has higher mechanical strength than ordinary flat glass and has the following advantages:
1. Lightweight, reducing the weight of the building; the "light" appearance can increase the usable area of ​​the building.
The weight of a red brick wall is 350 kg per square meter, while the weight of a double-layer grooved glass wall is 40 kg per square meter. It is obvious that the grooved glass not only reduces the weight of the building structure but also saves the painting of the interior and exterior walls, greatly reducing the project cost.
2. Sound insulation, heat insulation, improve the environment, and save energy
Double-layer grooved glass walls have sound insulation and heat insulation functions because there is an air layer between the two layers. Data introduction: The sound insulation of double-layer grooved glass is 38 decibels, and the heat transfer coefficient is 1.74W/m2.K, while the heat transfer coefficient of single-layer 6mm glass is 3.65W/m2.K.
Groove glass is an ideal wall material for reducing building energy consumption.

3. Easy to construct, economical, and practical
In foreign countries, the installation of double-row vertical grooved glass curtain walls, such as 3m high, 10m long, and 30m² grooved glass curtain walls, can be completed by one person in just one hour.
Groove glass is a medium-to-high-end wall material. It can also replace the skylights and skylights that do not generally require transparency. It can save a lot of wood, steel, and aluminum, and the cost can be saved by one-third.
4. Ideal safe, corrosion-resistant, and light-transmitting wall material
Groove glass has high mechanical strength. The use of grooved glass with steel wire can provide good safety protection for the walls of medium and high-rise buildings; the performance of grooved glass against acid, alkali, and high humidity is quite stable. Therefore, grooved glass can be used in buildings with corrosion resistance requirements; grooved glass is easy to assemble.
As a wall or roof material, it can be installed vertically, sloped, in single or double rows, and can be used as a large area of ​​glass curtain wall in large buildings. It can greatly increase the lighting area. It has multiple functions, such as decorative and structural properties. It is a multi-purpose building component.

The specification of architectural tempered U glass is measured by its width, flange height, glass thickness, and design length.

Varies with its width and thickness. The maximum length that can be produced for U glass of various standard sizes is as follows sheet shows:

Hot Tags: architectural tempered u glass, China architectural tempered u glass manufacturers, suppliers, factory, Building Material 7mm U Profile Tempered Glass, u profile tempered glass bulk purchase, linit u glass and tint, Low E Coated U Profile Glass, Clear Patterned U Channel Glass, Low Iron Ultra Clear Bent Shape U Profile Glass